Specifications

S3L System Guide32
Aux This switch assigns control of Aux (and Variable Group)
send levels to the channel encoders.
 When the Aux switch is pressed, the Aux Select menu appears
across the 16 channel encoder displays. Pressing a channel en-
coder assigns the sends for the bus indicated in the corresponding
display to all 16 channel encoders.
 The Page > Channel Navigation switch assigns the Aux sends
for the next bus to the channel encoders; pressing
< Page assigns
the previous group of Aux sends.
 The channel encoder In switch toggles the Aux send on/off for
that particular channel. The switch is lit when the send is on.
 The channel encoder Sel switch toggles that Aux send be-
tween pre- or post-fader for that particular channel. When the
switch is lit, the send is set to pre-fader.
Flip When the Flip switch is enabled, the current parameters as-
signed to the channel encoders are controlled using the faders
(flip to faders). The switch flashes when
Flip is enabled, and a
vertical arrow appears in the channel displays.
Channel Encoder Navigation Switches
Use the Channel Encoder Navigation switches to navigate
through the available pages of parameters.
The following switches are provided:
Back/Top This switch displays the first screen of parameter con-
trols for the currently assigned function.
Source This switch shows the sources of the currently banked
channels in the channel displays, and the source of the currently
selected channel in the Channel Control Display. For example, if
the source for a channel is Stage 1 Analog Input 3,
S1A3 appears
in the channel display and (if selected) in Channel Control.
< Page This switch assigns the previous set of parameters to the
channel encoders, where available. The switch lights when there
is a previous set to go to. For example, when Aux 2 is assigned to
the channel encoders, pressing this switch assigns Aux 1 to the
channel encoders. When on the first page, pressing the switch
does nothing.
Page > This switch assigns the next set of parameters to the chan-
nel encoders, where available. For example, when Aux 1 is as-
signed to the channel encoders, pressing this switch assigns Aux
2 to the channel encoders. The switch lights when there is a next
page to go to. When on the last page, pressing the switch does
nothing.
Fader Banking Controls
S3L provides controls for banking channels in layers and for
banking channels horizontally.
Bank A–F and User Bank Switches
Use these switches to bank channels to channel strips in layers.
The following switches are provided:
A–D Bank switches A–D bank input channels to the channel strips
as follows:
•
A banks Input Channels 1–16
•
B banks 17–32,
• C banks 33–48
•
D banks 49–64 (or FX Returns 1–8 depending on your input
channel configuration).
E This switch banks Aux outputs 1–16 to the channel strips.
F This switch banks Group/Variable Group outputs 1–8 to chan-
nel strips 1–8, and Matrix outputs 1–8 to channel strips 9–16.
User This switch banks VCAs 1–8 to channel strips 1–8, and
Mains Left, C/Mono, and Right outputs to channel strips 13–16.
For more information, see Chapter 10, “Auxes and Variable
Groups.”
If you bank to a different set of channels while parameters
are assigned to the channel encoders, those parameters re-
main on the channel encoders, and any adjustments to the
channel encoders apply to the currently banked channels.
Channel Navigation Switches
Source
Back
Page Page
Top
For more information, see “Banking Channels” on page 43.
Bank A–F and User Bank switches
Multi
Assign
User
OK
Cancel
A
B
C
D
E
F