Specifications

Chapter 2: Configuring and Connecting 25
AC Power Switch (Back Panel)
The Power switch applies power to the Stage 16 box. The power
switch is latching, so that when left in the On position, the device
powers up when AC power is applied to it, allowing for the use of
power sequencers.
Installing Additional Software
After having unpacked, assembled, connected, and powered up
your S3L system, you can manually install any additional soft-
ware, as follows:
VENUE Software Update A VENUE software update may be
available for your system. If an update is available, download and
install it.
Plug-Ins A core set of plug-ins are pre-installed on your system.
Any additional plug-ins (such as the S3L Plug-In pack) must be
activated and installed. See Chapter 17, “Plug-Ins” for installa-
tion and operational information.
ECx Ethernet Control ECx Ethernet Control software must be in-
stalled on both your S3L system and your remote device. For in-
structions, see Chapter 31, “ECx Ethernet Control.”
To check your system software, in VENUE go to the
Options > System tab