Specifications

S3L System Guide312
6 In the Internet Protocol Properties window, select “Obtain an
Address Automatically.”
7 Click OK to close the Internet Protocol properties window.
8 Click OK to close the Network Connection Properties window.
9 Do one of the following:
• For wireless connections, proceed to “Establishing a Wire-
leless Connection on a Windows Client” on page 313.
– or –
• For wired connections, proceed to “Enabling Remote Oper-
ation” on page 314.
Establishing a Wireless Connection
Once IP addresses are set, you can establish a connection from
the client computer to the wireless network. These instructions
show how to establish wireless connections to routers or WAPs.
Establishing a Wireless Connection on a
Mac Client
To establish a wireless connection on a Mac:
1 Under the Apple menu, choose System Preferences and
choose
Network from the System Preferences window.
2 Choose Airport from the network connections services list.
3 If you have chosen to broadcast the SSID of your router or
WAP, do the following:
• From the Network Name pop-up menu, choose your net-
work.
• Enter a valid password when prompted and click
OK.
4 If you have chosen to not broadcast the SSID of your router or
WAP, do the following:
• In the Network Name pop-up menu, choose J
oin Other Net-
work.
• In the Network Name field, type in the SSID of your net-
work,
• Choose the network security type used by the router or
WAP from the Security pop-up menu.
• Enter the network password, and click
Join.
5 Go to “Enabling Remote Operation” on page 314.
Internet Protocol (TCP/IP) Properties window
Configuring a wireless connection on the Mac
To configure the security features on your wireless router or
WAP device, see your device’s documentation.