Specifications

Chapter 31: ECx Ethernet Control 309
Setting the Mac Client IP Address Manually
After manually setting the IP address in VENUE, you need to set
the IP address of your Mac client computer.
To manually set the IP address on a Mac:
1 Under the Apple menu, choose System Preferences, then
choose
Network from the System Preferences window.
2 Do one of the following:
• For wired connections, choose
Ethernet from the network
connections services list.
– or –
• For wireless connections, choose
Airport from the network
connections services list.
3 Choose Manually from the Configure menu.
4 Enter the following:
• IP address: 10.0.0.2
• Subnet Mask: 255.255.255.0
• Router: (none required)
5 Click Apply.
6 Do one of the following depending on the configuration of
your network:
• If you are using a wireless network, go to “Establishing a
Wireless Connection” on page 312.
– or –
• If you are using a wired network, go to “Enabling Remote
Operation” on page 314.
Setting the Windows Client IP Address Manually
After manually setting the IP address in VENUE, you need to set
the IP address of your Windows client computer.
To manually set the IP address on Windows:
1 In the Start menu, click the Start button and choose Control
Panel.
2 In the Control Panel search box, type “network” and choose
Network and Sharing Center.
3 In the left pane of the Network and Sharing Center window,
click
Change adapter settings.
4 Do one of the following:
• For wired connections, right-click
Local Area Connection
and choose Properties.
– or –
• For wireless connections, right-click
Wireless Network
Connections
and choose Properties.
5 In the Connection Properties window, double-click Internet
Protocol Version 4 (TCP/IPv4)
.
Network Preferences window
Local Area Connection Properties window