Specifications

S3L System Guide308
Setting IP Addresses
Do one of the following to set the IP addresses in VENUE and on
your client computer, depending on the configuration of your net-
work:
 If you are connecting a computer directly, or you are using a
wireless router or WAP device that does not include a DHCP
server function, see “Setting VENUE and Client IP Addresses
Manually” on page 308.
– or –
 If you are using a wireless router that includes a DHCP server
function, see “Setting IP Addresses Automatically” on page 310.
Setting VENUE and Client IP Addresses
Manually
Set the IP addresses in VENUE and the client computer manually
if you are connecting a computer directly to your Avid live sys-
tem, or if you are using a wireless router or WAP device that does
not include a DHCP server function.
Setting the VENUE IP Address Manually
1 To manually set the IP address in VENUE:
1 In VENUE, go to the Options page and click the Interaction
page.
2 Under Ethernet Control, click Network Settings.
3 Select Use the Following Address and enter the following:
• IP address: 10.0.0.1
• Subnet Mask: 255.255.255.0
• Default Gateway: 10.0.0.1
4 Click Apply.
5 Select Enable Remote Control to activate the VENUE ECx
host.
6 Go to “Setting the Mac Client IP Address Manually” on
page 309.
IP configuration changes on your VENUE system and client
computer can take up to 2 minutes to become effective. After
making changes, be sure to allow sufficient time for the sys-
tem to assign IP addresses and establish communication be-
tween all the components.
If network communication is not established after allowing
sufficient time for IP addressing, verify that you are using the
correct cable types, have correctly connected the system, and
have working cables.
Ethernet Control section of the Interaction tab
Setting an IP address manually