Specifications

S3L System Guide306
4 Insert the USB drive containing the ECx host software into an
available USB port on the E3 engine.
5 Place the system into Config Mode.
6 In VENUE, go to the Options > System page and click Update.
7 Do one of the following:
•Click
Install.
– or –
• If more than one VENUE software installer is located on
the USB drive, click
Next to select the ECx Ethernet Con-
trol Software installer and click
Install.
8 Click Update and follow the on-screen instructions.
The ECx host software is installed, and the software automati-
cally restarts.
Installing the ECx Client Software
After installing the host software on your S3L system, install the
ECx client software on the computer you want to use to control
your system remotely.
To install the ECx Control client applications:
1 If you haven’t done so already, download the ECx Ethernet
Control Software from your Avid account and extract the file
to the desktop of your computer.
2 If necessary, transfer the ECx software to the computer you
want to use for remote control of your system.
3 To install the client software on a Mac, do the following:
• Locate and open the
Mac OSX Client folder.
• Double-click the
cotvnc-20b4.dmg file to mount the file.
•Drag the
Chicken of the VNC file to your Applications
folder.
4 To install the client software on Windows, do the following:
• Open the
Windows Client folder.
• Double-click the
UltraVNC-Viewer.exe file.
• Follow the on-screen installation instructions.
Uninstalling ECx Host Software
ECx host software can be uninstalled from VENUE.
To uninstall ECx host software from VENUE:
1 Insert the USB drive containing the ECx host software into an
available USB port on your or E3 engine.
2 Put your system into Config Mode.
3 Go to Options > System page and click Update.
4 Do one of the following:
• Click
Install.
– or –
• If more than one installer is located on the USB drive, click
Next to select the ECx Ethernet Control Software installer
and click
Install.
5 Select the ECx Ethernet Control software and click Install.
6 Click Uninstall.
The ECx host software is uninstalled, and the software automati-
cally restarts.
Reinstalling ECx Host Software
ECx Ethernet Control must be reinstalled on your system after re-
storing or updating your system software. How ECx is reinstalled
depends on whether you update or restore your system.
After Updating Your System
If you have previously installed ECx software on your system,
ECx software can be reinstalled immediately after you update
your system.
To update ECx:
1 Put your system into Config Mode.
2 Go to the Options > System page and click Update.
3 Follow the instructions on-screen to complete the Update.
After Restoring Your System
If you perform a complete System Restore (or if you are updating
from VENUE software 3.x or higher), the ECx host software
must be reinstalled from the USB drive containing the ECx host
software installer. See “Installing ECx Host Software” on
page 305.
When your perform an Update or a System Restore of your
VENUE software, you must reinstall the ECx host software.
See “Reinstalling ECx Host Software” on page 306.
For instructions on installing and configuring VNC client
software for mobile devices, refer to the software’s instruc-
tions. For iPad, the iTeleport app is recommended
(www.itleleportmobile.com).
The ECx folder will remain on your VENUE system hard
drive after uninstalling,