Specifications

S3L System Guide282
E3 Engine Audio Specifications
E3 System Processing
Parameter Value
Internal Sample Frequency 48 kHz
Internal Processing
Up to 64-bit floating point for input, output, and plug-in processing
44-bit floating point for mix bus processing
E3 Analog Mic Inputs, Pad Disabled
Parameter Conditions
Value
Units
Min. Typ. Max.
Phantom Power
48 Volts
Input Sensitivity @ 997 Hz, Gain = 10 dB (min.)
+7.988 dBu
Equivalent Input Noise (EIN) Gain = 60 dB, 150  source impedance
-123.5 dB
Frequency Response
V
INPUT
= -12.142 dBu, 20 Hz – 20 kHz relative to
1 kHz, Gain = 10 dB (min.)
-0.064 0 -0.552 dB
Dynamic Range Unweighted 150  source impedance, Gain = 10 dB (min.)
-108.1 dB
Dynamic Range A weighted 150 source impedance, Gain = 10 dB (min.)
-110.7 dB
THD+N Amp @ 997 Hz, Gain = 40 dB
0.0033 %
THD+N Freq
measured at -32.227 dBu, 20 Hz – 20 kHz,
Gain = 40 dB
0.0024 0.0033 0.0040 %
Common Mode Rejection
Ratio
V
INPUT
= -21.731 dBu, 20 Hz – 20 kHz,
Gain = 10 dB (min.)
64.3 -74.3 -75.1 dB
Inter-channel Crosstalk
V
INPUT
= -12.150 dBu, 20 Hz – 20 kHz,
Gain = 10 dB (min)
-121.4 -106.3 -95.1 dB
Input Impedance @1 kHz
3.6K ohms
E3 Analog Mic Inputs, Pad Enabled
Parameter Conditions
Value
Units
Min. Typ. Max.
Phantom Power
48 Volts
Input Sensitivity
@ 997 Hz, Gain = 10 dB (min.)
+28.168 dBu
Frequency Response V
INPUT
=+8.028 dBu, 20 Hz – 20 kHz relative to
1 kHz, Gain = 10 dB (min.)
-0.016 0 -0.914 dB
Dynamic Range Unweighted
150  source impedance, Gain = 10 dB (min.)
-108 dB
Dynamic Range A weighted
150  source impedance, Gain = 10 dB (min.)
-110.7 dB
THD+N Amp @ 997 Hz, Gain =40 dB
0.0046 %
THD+N Freq measured at -3.808 dBu, 20 Hz – 20 kHz,
Gain = 40 dB
0.0012 0.0046 0.0051 %
Common Mode Rejection Ratio V
INPUT
= -1.276 dBu, 20 Hz – 20 kHz,
Gain = 20 dB
-59.3 -64.8 -65.0 dB
Inter-Channel Crosstalk V
INPUT
= +8.233 dBu, 20 Hz – 20 kHz,
Gain = 10 dB (min.)
-122.1 -106.1 -95.0 dB
Input Impedance @1 kHz
3.7k ohms