Specifications

S3L System Guide250
Adding Tracks to the Playlist
To add tracks to the Playlist:
1 Insert your USB drive(s) into a USB port on the E3 engine.
2 Go to the Media page and click the Playback tab.
3 Locate the Library section. If one USB drive is connected, that
drive appears in the window at the top of the section. The con-
tents of that drive appears in the list below it. A speaker icon
next to individual files indicates audio files that can be added
to the Playlist.
4 In the Library list, select one or more tracks.
5 Click the Add button. The selected track(s) appear in the Play-
list.
6 To remove a track from the Playlist, select it in the Playlist and
click
Remove.
Setting the Play Mode
After adding tracks to the Playlist, set the Play Mode. Play Mode
can be set on-screen in the Transport. By default, Play Mode is set
to play all tracks in the Playlist once when playback is engaged.
To set the Play Mode on-screen, do any of the following:
 Click the Play One Track button so that it is lit to play only the
cued track.
 To play all tracks in the Playlist in sequential order, make sure
the Play One Track button is unlit.
 Click the Repeat Playback button so that it is lit to repeat play-
back of either the cued track or the Playlist.
 To play the track or the Playlist once, make sure the Repeat
Playback button is unlit.
Engaging Playback
To engage playback:
1 Select a track in the Playlist so that is cued for playback. A
track is cued for playback when it is highlighted in yellow or
green.
2 Press the Play button in the Transport.
3 To stop playback, press the Stop button in the Transport.
You can audition an individual audio file by clicking the
speaker icon in the Library or in the Playlist. Audition au-
dio is sent to the Solo bus and can be monitored using
headphones connected to the Headphone Output.
A drive and its contents
Shift-click to select multiple consecutive items in the list,
and Control-click to select multiple non-consecutive items.
Selecting multiple files in the Library list
Clicking the Add to Playlist button
Tracks in the Playlist
Enabled Play One Track button (left) and Repeat Playback button
(right)
A selected and cued track in the Playlist