Specifications

Chapter 21: Events 221
Creating Actions
Each event can have up to eight actions. You create new actions
by selecting them from the Add pop-up menu. Once added, you
can customize actions by editing their properties, as available.
Adding Actions to an Event
To add an action:
1 Select an event, or create a new one.
2 Click the ADD pop-up menu in the Action list and select an ac-
tion type. The selected action type, with its default settings, is
added to the action list area.
Editing an Action Type and Properties
To edit an action:
1 Double-click the action row in the list. Or, right-click the ac-
tion item and choose
Edit.
2 Click the displayed action Type and make a new selection.
Action State
To edit an action State for switches, buttons and other two-state
functions:
 Click the State pop-up menu and make a selection. Choices for
State vary as appropriate for the trigger type, and will include
Closed or Open, On or Off, and Toggle.
Action Behavior
To edit action behavior:
 Click the Behavior pop-up menu and choose Latch or While
Active,
as appropriate:
Latch Fixes the behavior in its defined state (such as open or
closed) until unlatched by another event or operation.
While Active Latches the behavior in its defined state as long the
associated trigger is in effect (active, or “true”), such as unmuting
a channel only while a footswitch is pressed and held.
Pulse and Duration (GPI Output only) Produces a single-shot
pulse output. Duration range is 0.1 second (100 ms) to 1.0 second,
in 0.1 second increments. The default duration is 0.3 seconds
(300 ms).
To configure GPI output pulse and duration for an action:
1 Double-click the action to edit it
2 Click the Behavior selector and choose Pulse.
3 Enter a value for Pulse Duration.
4 To confirm you changes, press Enter or click anywhere else in
the Events window.
Action pop-up menu
Trigger added to Triggers list
For a list of available actions, see “Action Types” on
page 228.
Editing an action