Specifications

S3L System Guide218
Deleting and Clearing an Event
Deleting an event removes it permanently from the Event list.
Clearing an event leaves the named event in the Event list but
clears all associated triggers and actions.
To delete an event:
1 Select one or more events in the Event list.
2 Do one of the following:
• Click the
Delete button on-screen.
• Right-click a selected event and choose
Delete.
3 Click Delete in the Confirm Event Operation dialog to delete
the event. Or click
Cancel to cancel the operation.
To clear an event:
1 Select one or more events in the Event list.
2 Do one of the following:
• Click the Clear button on-screen.
• Right-click a selected event and choose
Clear.
3 Click Clear in the Confirm Event Operation dialog to clear the
event. Or click
Cancel to cancel the operation.
Enabling and Disabling Events
Events can be disabled to suspend their operation. An event can
be selected and edited while it is disabled.
You can toggle the enabled state of one or more events in the list
by clicking the on-screen Enable icons in the Event list, or you
can disable the Event list globally by clicking the master event
Disable button.
Disabling an event stops all timers (Wait/delay properties) asso-
ciated with that event, preventing any pending (delayed) actions
configured for While Active behavior from occurring.
Toggling Enable Status for Selected Events
To toggle the enable/disable status of an event in the list:
1 Select one or more events in the Event list.
2 Click the Enable icon for the selected event to toggle its state.
Or, right-click an item and choose
Enable or Disable as appro-
priate. When the Enable icon is lit (green) the event is enabled;
when the icon is unlit the event is disabled.
Disabling an active event does not automatically de-activate any
associated actions configured for While Active behavior. Use the
Reset command instead (see “Resetting Events” on page 222).
Disable All Events
The Disable button in the events Commands section lets you tem-
porarily disable all events in the Event list.
To disable all events:
 Click the on-screen Disable button in the events Commands
area. The Disable button lights, and all items in the Event list
show “Disabled” in the Status column.
To re-enable events:
 Click the Disable button again.
All events are prevented from firing when the global Disable
function is in effect. However, active events are not de-activated.
Use Reset or Reset All for this (see “Resetting Events” on
page 222).
Individual event enable/disable status is preserved (events retain
the current state of their Enable icons) and can be modified when
globally disabling and enabling events using the master Disable
button.
One selected event and two disabled events
Disable (all)
Enabled
Disabled events
events
Disabling an event can be a useful troubleshooting tool, such
as when an event has caused an action/trigger feedback loop
and must be edited before being re-enabled.