Specifications

Chapter 20: Snapshots 211
Pre Settings
Snapshots can be used to recall the preamplifier settings on inputs
for all scoped Input Channels. You can set any of the following
Pre parameters to be recalled by the Pre data type button: Gain,
Pad and Phase/polarity, +48V (Phantom Power), HPF corner fre-
quency and in/out state.
To set the Pre parameters recalled by the Pre Data Type button:
1 Go to Options > Snapshots.
2 Under Pre, select the options you want to include. Selected
items will be affected when the Pre data type is included in the
scope of a snapshot.
Classifying Aux Sends
You can classify Aux Sends as monitor sends (“Mon”) or as ef-
fects sends (“FX”), which lets you scope each type separately
from the Snapshots tab of the Options page.
To classify Aux Sends for snapshot scope:
1 Go to the Options page and click the Snapshots tab.
2 For each Aux Send bus or bus pair, click the Aux Mon or
Aux FX buttons to classify it as a monitor send or effects send,
respectively.
Aux Pre/Post State
Select this option to include the pickoff point pre-fader or
post-fader state of each Aux Send in snapshots.
Setting Pre parameters
This option is only a means of organizing Aux Sends for
snapshot control, and does not directly affect Aux bus op-
eration.
Classifying Aux Sends