Specifications

S3L System Guide158
Presets for Built-In and Graphic EQ
You can store and load EQ settings to disk as Preset files. Presets
can be used with built-in and plug-in EQ processors, including
the graphic EQ. Preset files can be moved between systems and
used for other Shows.
To save or load a 4-band EQ preset:
1 Adjust EQ parameters as needed.
2 In the on-screen EQ section, click the Presets folder icon (next
to the Lo band EQ controls).
3 Choose a Presets folder in the Folder display at the top of the
Presets window. If necessary, choose the appropriate Presets
folder by clicking and selecting it from the Folder pop-up
menu.
4 Do any of the following:
• To preview an existing preset, click its name in the Presets
window.
• To load the currently selected preset, press Enter or click the
Close box in the Presets window title bar.
• To load a preset and close the Presets window, double-click
the preset.
• To save the current EQ settings as a new preset, click
New
and enter a name for the preset file. All EQ settings, includ-
ing HPF settings, are saved to the preset.
• To cancel without changing settings, click
Cancel.
To save or load a preset for the Graphic EQ:
1 Go to the Outputs page for the channel on which the graphic
EQ is assigned. If necessary, click the
31-Band Graphic Equal-
izer
tab to display the graphic EQ on that channel.
2 Click the Presets folder icon (above the EQ bands, next to the
In-Circuit button).
3 Choose a Presets folder in the Folder display at the top of the
Presets window. If necessary, choose the appropriate Presets
folder by clicking and selecting it from the Folder pop-up
menu.
4 Do any of the following:
• To preview an existing preset, click its name in the Presets
window.
• To load the currently selected preset, press Enter or click the
Close box in the Presets window title bar.
• To load a preset and close the Presets window, double-click
the preset.
• To save the current graphic EQ settings as a new preset,
click
New and enter a name for the preset file.
• To cancel without changing settings, click
Cancel.
Check the Factory Presets folder for pre-configured settings.
Four -band EQ Presets folder icon (left)
4-Band EQ Presets window
For information about creating and transferring folders and
files, see Chapter 19, “Shows and File Management.”
Graphic EQ Presets folder icon (right)