Specifications

Chapter 16: EQ 157
Enabling and Adjusting Graphic EQ
Graphic EQs are enabled and adjusted on-screen.
To enable the graphic EQ:
1 Target an Output bus with a Graphic EQ assigned. If no
graphic EQ is assigned, click the 3
1-Band Graphic Equalizer
tab on the Outputs tab and assign one using the Graphic EQ
pop-up menu.
2 Click the In-Circuit button on-screen to toggle in/out status.
When enabled, the In/Out switch LED lights.
3 Click and drag the on-screen Graphic EQ band controls to
make adjustments as necessary.
Resetting Graphic EQ Parameters
To reset a band to its default setting, do one of the following:
 Right-click the individual band fader on-screen and choose
Reset.
 Alt-click the band on-screen.
To reset the entire graphic EQ to flat:
 Right-click anywhere in the Graphic EQ section on-screen
(but not directly on a fader) and choose
Reset GEQ Section.
Input Direct Mode
Input Direct mode lets you completely bypass the built-in dynam-
ics and EQ processing, and all inserts on Input Channels and FX
Returns.
To toggle Input Direct model:
1 Select an input channel.
2 Click the Input Direct button in the (channel) Config section in
the upper right corner of the screen. When enabled, the Input
Direct LED lights.
EQ Settings and Presets
Built-in parametric and Graphic EQ settings can be copied and
pasted between channels. EQ presets can also be saved and
loaded to archive and transfer settings.
Copying and Pasting EQ Settings
To copy and paste an EQ setting:
1 Do one of the following:
• To copy a 4-band EQ setting, right-click the on-screen EQ
section or EQ graph (not on an encoder) and choose
Copy
EQ Settings
.
– or –
• To copy a Graphic EQ setting, right-click the graphic EQ
display (not on a fader) and choose
Copy GEQ Settings.
2 Go to the channel where you want to paste the settings.
3 Do one of the following:
• To paste a 4-band EQ setting, right-click in the new chan-
nel’s EQ section or graph and choose
Paste EQ Settings.
All EQ settings, including HPF settings, are copied to the
new channel.
– or –
• To paste a Graphic EQ setting, right-click in the new chan-
nel’s Graphic EQ section and choose
Paste GEQ Settings.
Graphic EQ In-Circuit button
Adjusting a Graphic EQ band
Input Direct button
EQ Reset/Copy/Paste pop-up menu