Specifications
S3L System Guide156
Adjusting EQ Plug-Ins
EQ plug-ins can map their gain, frequency, and Q/bandwidth
controls to corresponding encoders in Channel Control.
To access plug-in EQ parameters in Channel Control:
1 Select one or more channels.
2 Make sure the Channel Control main menu is displayed in the
Channel Control displays.
3 Under the display showing EQ, press the Channel Control en-
coder
Sel switch so that it is lit.
4 Press the Channel Control encoder under the display showing
EQ. Plug-in parameters are now mapped to the Channel Con-
trol encoders. Parameters in the displays are shown with an as-
terisk to mark them as plug-in parameters.
5 Press the Back switch again to reassign the built-in EQ param-
eters to Channel Control.
To bypass an inserted plug-in from Channel Control:
With the plug-in assigned to Channel Control, press the In
switch in the Channel Control navigation section. When lit, the
plug-in is in (engaged); when unlit, the plug-in is out (by-
passed).
Graphic EQ for Outputs
Up to 16 built-in 31-band Graphic EQ can be inserted on any of
the output busses (Mains, Groups, Auxes, and Variable Groups)
and Matrix mixers. The Graphic EQ provides +/– 12 dB of gain
and constant Q.
Assigning a Graphic EQ to a mono channel uses one available
Graphic EQ. Assigning a Graphic EQ to a stereo channel uses
two available Graphic EQs. Controls for stereo EQs are linked.
Inserting Graphics EQs on Outputs
To insert a Graphic EQ on an Output bus:
1 Select an output channel or Matrix mixer.
2 On the Outputs page, click the 31-Band Graphic Equalizer tab.
3 Click the Graphic EQ selector and choose an available mono
or stereo Graphic EQ.
The 31-Band Graphic EQ appears on-screen.
Plug-ins that do not map directly to Channel Control en-
coders can be controlled using the Global Control encod-
ers. See “Adjusting Plug-Ins Using Global Control” on
page 174.
Press the Back/Top Channel Control Navigation switch to
display the main Channel Control menu.
Lit EQ Channel Control encoder Sel switch
Channel Control In navigation switch
For more information, see Chapter 17, “Plug-Ins.”
User
Input
EQ
CompLim
Exp
Ch 1
1
Expnd
Top
In
Back
Page
Page
Selecting a Graphic EQ
31-band graphic EQ