Specifications

S3L System Guide154
EQ Parameter Mapping in Channel Control
4-Band Parametric EQ (Digital Mode)
The following table shows how built-in EQ parameters (default
digital EQ mode) are assigned to the Channel Control encoders:
.
4-Band Parametric EQ (Analog Mode)
The following table shows how parameters are assigned to the
Channel Control encoders when using built-in EQ in analog
mode:
.
To engage or disengage a band:
 Press the Channel Control encoder In switch for that band to
toggle it in/out. When engaged, the
In switch LED is lit.
To bypass the current EQ module:
 Press the Channel Control In switch.
To adjust EQ gain and frequency parameters:
 Adjust the Gain and Freq encoders for each band as needed.
To reset an EQ parameter to its default value:
 Press and hold Default and press the encoder for the parameter
you want to reset.
To reset the entire EQ section (all bands) on a channel:
 With the main Channel Control menu shown in the Channel
Control displays, press and hold
Default, then press the EQ
Channel Control encoder.
Toggling Control Between Q/Balance/Width
Freq and Q (BW) share the same encoder in each EQ band. The
built-in EQ and some plug-ins also provide Q (or BW/bandwidth)
for Analog EQ mode.
To adjust Q (or B/W):
1 Press the encoder Sel switch for the desired band to place that
encoder in Q (or B/W) mode.
2 Rotate the encoder to set the desired Q (or B/W).
Bell and Shelf Filters
The EQ filter type (Shelf or Bell) can be toggled for the Hi and Lo
on-screen.
To toggle between Bell and Shelf filters:
 Click the on-screen Bell/Shelf selector for that channel.
The indicator LED at the bottom of that encoder’s ring indicates
filter type and Freq/Q mapping as shown in the tables.
Channel Control parameter mapping for digital EQ (built-in or
plug-in)
Channel
Control
encoder
Encoder
Rotate
Encoder Sel
Switch
Encoder IN
Switch
1
Low Gain n/a EQ band in/out
2
Low Freq/Q Toggles Freq/Q Bell in/out
3
LoMid Gain n/a EQ band in/out
4
LoMid Freq/Q Toggles Freq/Q n/a
5
HiMid Gain n/a EQ band in/out
6
HiMid Freq/Q Toggles Freq/Q n/a
7
High Gain n/a EQ band in/out
8
High Freq/Q Toggles Freq/Q Bell in/out
Channel Control parameter mapping for analog EQ (built-in or
plug-in)
Channel
Control
encoder
Encoder
Rotate
Encoder Sel
Switch
Encoder IN
Switch
1
Low Gain n/a EQ band in/out
2
Low Freq n/a n/a
3
LoMid Gain n/a EQ band in/out
4
LoMid
Freq/Bandwidth
(B/W)
Toggles
Freq/Bandwidth
(B/W)
n/a
5
HiMid Gain n/a EQ band in/out
6
HiMid
Freq/Bandwidth
(B/W)
Toggles
Freq/Bandwidth
(B/W)
n/a
7
High Gain n/a EQ band in/out
8
High Freq/Q n/a n/a