Specifications
Chapter 16: EQ 153
Adjusting EQ
You can adjust EQ from the Channel encoders, Channel Control,
and on-screen. When adjusting EQs, an EQ response curve ap-
pears on-screen, and parameter settings are shown in the corre-
sponding displays on the S3 control surface.
Adjusting HPF Controls
To adjust the built-in HPF from the channel encoders:
1 Bank Input Channels and/or FX Returns.
2 Press the HPF Channel Encoder Assign switch to assign HPF
to the channel encoders.
3 Press the channel encoder In switch to toggle the filter in/out.
4 Adjust the HPF corner frequency by rotating the correspond-
ing channel encoder.
5 To make fine adjustments, hold Fine while rotating an en-
coder.
To adjust the built-in HPF from Channel Control:
1 Select one or more input channels.
2 Make sure the Channel Control main menu is shown in the
Channel Control displays.
3 Press the Channel Control encoder under the display showing
Input.
4 HPF is assigned to the third encoder in Channel Control. Ad-
just the corner frequency by rotating the corresponding en-
coder.
5 Press the Channel Control encoder In switch to toggle the HPF
in/out.
Adjusting Built-In 4-Band EQ Controls
To use the built-in EQ on a channel:
1 Select one or more channels.
2 Make sure the Channel Control main menu is shown in the
Channel Control displays.
3 Press the Channel Control under the display showing EQ. EQ
controls are now available on the Channel Control encoders.
4 Press the In switch in the Channel Control Navigation section
to toggle the EQ processor in/out.
5 Adjust the Channel Control encoders for the displayed param-
eters.
6 To make fine adjustments, hold Fine while rotating an en-
coder.
7 Press the Analog button on-screen to toggle between the two
EQ types.
See “On-Screen EQ Controls” on page 155 for instruc-
tions on adjusting EQ parameters on-screen.
Gain Channel Encoder Assign switch
Channel encoder In switch
Group Channel
Dyn
Mix
Insert Pan
Aux Flip
Input EQ
Gain
HPF
Comp
Pan
Aux
Flip
Ch 1
HPF
1
EQ
LR
DY
Press the Back/Top Channel Control Navigation switch to
return to the Channel Control main menu.