Specifications

Chapter 15: Dynamics 147
Dynamics Settings and Presets
Built-in dynamics settings can be copied and pasted between
channels. Settings can also be stored and loaded as dynamics Pre-
sets to archive and transfer settings.
Copying and Pasting Dynamics Settings
To copy and paste dynamics settings:
1 Right-click anywhere in the Comp/Lim or Exp/Gate (input
channels only) areas of the on-screen dynamics section and
choose
Copy Comp/Lim Settings, or Copy Exp/Gate Settings.
2 Go to the channel where you want to paste the settings.
3 Right-click in the Comp/Lim or Exp/Gate areas of the
on-screen dynamics section and choose
Paste Comp/Lim Set-
tings
or Paste Exp/Gate Settings.
To copy and paste all of a channel’s built-in dynamics settings:
1 Right-click in the on-screen Dynamics Graph and choose
Copy Dynamics Settings.
2 Select the Input Channel where you want to paste the settings.
3 Right-click in the on-screen Dynamics Graph of the new chan-
nel and choose
Paste Dynamics Settings.
Presets for Built-In Dynamics
You can store and load dynamics settings as presets for built-in
and plug-in dynamics processors. Presets can be accessed
on-screen.
To save or load a preset:
1 Adjust dynamics settings on a channel (if saving a preset), or
select an Input Channel (to load a preset).
2 Click the Comp/Lim or Exp/Gate Presets icon on-screen.
3 If necessary, select the appropriate Presets folder by clicking
and selecting it from the
Folder selector.
4 Do one of the following:
• To preview an existing preset, click its name in the Presets
window.
• To load the currently selected preset, press Enter or click the
Close box (X) in the Presets window title bar.
• To save the current dynamics settings as a new preset, click
New and enter a name for the preset file.
• To cancel without changing settings, click
Cancel.
Copying dynamics settings
Built-in dynamics Presets buttons
Previewing a preset in the Presets window
Presets
Presets
Exp/Gate
Comp/Lim
Presets Folder selector