Specifications

Chapter 15: Dynamics 145
Adjusting the Built-In Exp/Gate
The Exp/Gate can be adjusted using Channel Control and
on-screen. When adjusting Dynamics, a Dynamics response
curve appears on-screen.
To engage and adjust Exp/Gate controls:
1 Select an input channel.
2 Make sure the Channel Control main menu is shown in the
Channel Control displays.
3 Press the Channel Control encoder under the display showing
Exp/Gate. Expander/gate controls are now available on the
Channel Control encoders.
4 Press the In switch in the Channel Control Navigation section
to toggle the Exp/Gate processor in/out
5 Adjust the Channel Control encoders for the parameters
shown in the displays.
6 To make fine adjustments, hold Fine while rotating an en-
coder.
Adjusting Dynamics Plug-Ins
Dynamics plug-ins inserted on channels can be adjusted using
Channel Control. Dynamics plug-ins map their threshold, ratio,
attack, release, gain, and filter controls to the corresponding en-
coders in Channel Control.
To access inserted Dynamics plug-in parameters in Channel
Control:
1 Select one or more channels.
2 Make sure the Channel Control main menu is displayed in the
Channel Control displays.
3 To control a Comp/Lim plug-in, do the following:
• Press the Channel Control encoder
Sel switch under the dis-
play showing
CompLim.
• Press the Channel Control encoder under the display show-
ing
CompLim. Parameters for the inserted Comp/Lim
plug-in are now mapped to the Channel Control encoders.
Parameters in the displays are shown with an asterisk to
identify them as plug-in parameters.
4 To control an Exp/Gate plug-in, do the following:
• Press the Channel Control encoder
Sel switch under the dis-
play showing
ExpGate.
• Press the Channel Control encoder under the display show-
ing
ExpGate. Parameters for the inserted Exp/Gate plug-in
are now mapped to the Channel Control encoders.
5 Press the Back switch again to reassign the built-in dynamics
parameters to Channel Control.
To bypass an inserted plug-in from Channel Control:
 With the plug-in assigned to Channel Control, press the Chan-
nel Control Navigation
In switch. When lit, the plug-in is in
(engaged); when unlit, the plug-in is out (bypassed).
Press the Back/Top Channel Control Navigation switch to
return to the Channel Control main menu.
Channel Control Exp/Gate encoder
Channel Control Navigation In switch
See “Exp/Gate Parameter Mapping” on page 150 for in-
formation on how Exp/Gate parameters are mapped to the
Channel Control encoders.
Input
EQ
CompLim
ExpGate
Aux 1-8
Aux 9-16 Va
Expnd
Top
In
Back
Page
Page
Plug-ins that do not map directly to Channel Control en-
coders can be controlled using the Global Control encod-
ers. See “Adjusting Plug-Ins Using Global Control” on
page 174.
Press the Back/Top Channel Control Navigation switch to
return to the Channel Control main menu.
Lit Comp/Lim Channel Control encoder Sel switch
Input
EQ
CompLim
ExpGate
Aux