Specifications

Chapter 12: Patchbay 125
Unassigning and Clearing Assignments
To unassign a single channel in the Patchbay:
 Place the cursor over an assigned channel in the Patching Grid
and click.
To clear Patchbay Assignments:
1 Click the appropriate I/O tab, Channel Type tab, and Hardware
tab.
2 In the top left corner of the patching grid, Click the Clear As-
signments button, and click
Clear in the ensuing dialog. All
Patchbay assignments for the selected Patchbay pages are
cleared.
3 Repeat for other types of I/O as necessary.
Using the Arrow Keys to Assign Channels
You can also use the Arrow keys instead of the trackball to assign
routing.
To route channels using the Arrow Keys on the keyboard:
1 Place the cursor over the Patching Grid so that the cursor
changes to the crosshair.
2 Press the Left or Right Arrow keys to move the crosshair to the
next or previous hardware I/O column; press the Down or Up
Arrow keys to move the cursor to the next or previous channel.
3 When the crosshair is over the correct square in the grid, press
Enter to assign the patch.
Multiple Input and Output Assignments in
the Patchbay
A single hardware input source can be assigned to multiple Input
Channels or FX Returns in the Patchbay. An output bus can be as-
signed to multiple hardware outputs.
To assign a hardware input source to multiple Input Channels or
FX Returns:
1 Go to the Patchbay page and click the Inputs tab.
2 Click in the patching grid to assign the source to the first Input
Channel or FX Return.
3 Click additional grid squares in the same column to assign the
source to additional channels. The selected hardware input is
routed to each of the assigned Input Channels or FX Returns.
To assign an Output bus to multiple hardware outputs:
1 Go the appropriate Patchbay page and click the Output tab.
2 Click in the Patching Grid to assign the Output bus to the first
hardware output.
3 Click additional grid squares in the same row to assign the
same Output bus to additional hardware outputs. The selected
bus is assigned to all the assigned hardware outputs. An aster-
isk (*) appears at the end of the displayed destination to indi-
cate the multiple routing.
To clear all Input, Output, Direct, or Insert assignments,
shift-click all Channel Type and Hardware tabs to select
all pages.
Clicking the Clear Assignments button
Multiple input sources cannot be assigned to a single Input
Channel or FX Return.
A hardware input routed to multiple Input Channels
An Output bus assigned to multiple hardware outputs