Specifications

Chapter 11: Matrix Mixers 119
Matrix Mixer Output Processing
Matrix mixer output processing can be controlled using Channel
Control.
To apply output processing to a Matrix mixer:
1 Assign Matrixes to Global Control.
2 Press the Global Control encoder Sel switch under the display
showing the Matrix output you want to adjust.
3 Make sure the main Channel Control menu is shown in the
Channel Control displays.
4 Press the Channel Control encoder under the display showing
the processing function you want to adjust.
Snapshot Data and Parameters for
Matrix Mixers
Snapshots can store and recall all source assignments of each ma-
trix mixer when the Matrix (“Mtx”) data type is scoped. In addi-
tion, all User Input assignments are stored, letting you reconfig-
ure Matrix mixers and User Input assignments on a per snapshot
basis, if desired.
The following table describes what can be stored and recalled in
each snapshot when the MTX data type is scoped.
The Recall Safe tab of the Snapshots page provides two data
“Mix” data types that let you discretely “safe” source and/or user
input assignments to prevent them from being changed with a
snapshot recall.
For complete information on VENUE snapshots, see Chapter 20,
“Snapshots.”
Table 2. Snapshot data types and parameters for Matrix mixers
Snapshot
Data Type
Included Parameters (for Each Scoped
Channel Strip)
MTX
Mixer Input Sources, User Input Assignments
(global to all Matrixes), and pickoffs; Mixer Input
level, Mixer Input on/off state and Mixer
Input Link
state
The link state of Matrix outputs cannot be stored in snapshots.