Specifications

Chapter 11: Matrix Mixers 117
Adjusting Matrix Mixer Input Controls
Input sources for the Matrix Mixers can be controlled from the
Global Control encoders or on-screen.
Matrix Input Level
To control Matrix input source levels from the Global Control
encoders:
1 Make sure the Global Control main menu is displayed in
Global Control.
2 Press the encoder below the display showing Matrixes. Matrix
outputs 1–8 are assigned to the eight Global Control encoders.
3 Press the encoder below the display showing the Matrix you
want to control. The first eight inputs to that Matrix mixer are
assigned to the eight Global Control encoders.
4 Do any of the following to control each mixer input:
• Press the encoder
In switch to turn that Matrix mixer input
source on or off. The switch is lit green when the input is on.
• Turn the encoder to set the level for the input source. Source
input levels are indicated in the on-screen Matrix Mixer
level meters.
5 To control source inputs 9–12, press the Page > Global Con-
trol Navigation switch to assign those sources to the encoders.
6 Do either of the following to navigate out of the Matrix sends:
• To return to the Matrix outputs press the
Back/Top Global
Control Navigation switch once.
• To return to the main Global Control menu, press the
Back/Top Global Control Navigation switch twice.
Matrix Mixer Input Pan
Matrix mixer input pan controls adjust the panning of each Ma-
trix mixer input across the stereo outputs of a stereo-linked Ma-
trix mixer.
To control Matrix send pan from the Global Control encoders:
1 Assign the Matrix mixer input source to Global Control for the
stereo Matrix you want adjust.
2 Press the encoder Sel switch to assign send pan control to the
encoder.
3 Adjust the encoder to adjust pan.
• Rotate to the left to pan the input source to the left
(odd-numbered) Matrix mixer.
• Rotate to the right to pan the input source to the right
(even-numbered) Matrix Mixer.
On-Screen Matrix Input Controls
To control Matrix input source (“send”) levels on-screen:
1 Go to the Outputs page and select the Matrix mixer.
2 Click the Matrix Mixer tab to display the Matrix input controls.
3 Do any of the following to control each mixer input:
• Click the
On button to turn that Matrix mixer input source
on or off.
• Click and drag the level knob to set the level for the input
source. Source input levels are indicated in the on-screen
Matrix Mixer level meters.
• For stereo-linked Matrixes only, click and drag the pan
knob to the left to pan the input source to the left (odd-num-
bered) Matrix mixer, and to the right to pan the input source
to the right (even-numbered) Matrix Mixer.
Resetting Matrix Mixer Input Paramters
You can reset level, pan and stereo link settings for any matrix
mixer. Input source assignments persist.
To reset a Matrix mixer parameter to its default value:
1 Select one or more Matrix mixers you want to change.
2 Right-click the encoder on-screen and choose Reset.
To reset all Matrix mixer parameters to their default values:
1 Select one or more Matrix mixers you want to change.
2 Click the pop-up menu at the bottom of the mixer area and
choose
Reset Mix.
Matrix Mixer tab
On-screen Matrix input pan control knob (top), level control knob
(middle) and On button (bottom)
Resetting a mix