Specifications

S3L System Guide116
Configuring User Inputs
Each Matrix mixer can have its own set of eight assignable User
Inputs. User Inputs for each Matrix are configured in the User As-
sign panel of the Matrix Mixer tab.
To configure the User Inputs for a Matrix mixer:
1 Go to the Outputs page and select a Matrix mixer to display
that Matrix on-screen.
2 Click the User Assign button to display the User Assign panel
for that Matrix mixer.
3 For any of the eight available User Inputs, click the on-screen
Source pop-up menu and select an available source. Choices
include:
• Input Channels and FX Returns (if available)
• Stage, Engine, and Console audio inputs
• Inputs from Pro Tools
4 Click the Pickoff pop-up menu to choose the desired pickoff
for any Input Channel or FX Return:
• Top of Channel (for Input Channels) or Top of FX Return
(for FX Returns)
• Insert Return
• Pre/Post-Fader
5 Click the User Assign button again to return to the main Matrix
screen.
Assigning Input Sources to Matrixes
To assign input sources to a Matrix mixer:
1 Go to the Outputs page and select a Matrix mixer.
2 Click the Input Source selector at the top of each Matrix chan-
nel and select the desired input source. Choices include Auxes,
Groups, Mains and any of the eight available User Inputs.
Assigning Sources to Multiple Mixers
You can select multiple Matrix mixers simultaneously and assign
sources to all selected mixers at the same time.
To assign input sources to more than one Matrix mixer at a time:
1 Go to the Outputs page and use Multi-Select (or the Shift key)
to select two or more Matrix mixers in the fader display at the
bottom of the screen.
2 Click the Source selector at the top of a mixer channel (1–8,
Left, Right, C/Mono, or User) and select the desired source.
User Assign panel
Choosing a User Input source for a Matrix mixer
The Pre/Post-Fader pickoff point is set globally in the Input
Channel Fader Pickoff section of the Options > Pickoffs page.
Choosing an Input Source for a mixer
To use Input or FX Return channels in a Matrix mixer, assign
them as User Inputs, then assign those User Inputs as input
sources. For more information, see “Configuring User In-
puts.”