Specifications

S3L System Guide110
Adjusting Stereo Sends
When Aux busses are linked, input signals are panned across the
bus pair. Aux panning can be controlled from the channel encod-
ers or from Channel Control.
Using the Channel Encoders
For stereo-linked sends, send level and pan controls are assigned
to the channel encoders separately.
To adjust stereo-linked Aux or Variable Group sends:
1 Bank Input Channels and/or FX Returns to the channel strips.
2 Press the Aux Channel Encoder Assign switch to access the
Aux Select menu. Send and pan appear as odd/even pairs in the
menu.
3 To adjust level, press the encoder under the display showing
AuxSnd<n> (where <n> is the Aux send channel number).
Send levels to that send pair are assigned to the channel encod-
ers.
4 To adjust pan, press the encoder under the display showing
Aux<n>Pan (where <n> is the Aux send channel number). Pan
to that send pair is now assigned to all 16 channel encoders.
For example, if Aux send 1/2 are linked, press the encoder un-
der
Aux1Pan to assign Aux send 1/2 pan control to the encod-
ers.
5 Rotate the channel encoders as needed to adjust pan. Pan set-
tings for indicated in the display.
Using Channel Control
To adjust a stereo-linked send level in Channel Control:
 Rotate the odd-numbered encoder for the desired pair of sends.
For example, if Auxes 1 and 2 are stereo linked, adjust the en-
coder under the display showing
AuxSnd1 to adjust send level.
To pan a stereo linked send in Channel Control:
 Rotate the even-numbered encoder for that pair. For example,
if Auxes 1 and 2 are stereo linked, rotate the encoder under the
display showing
Aux1Pan.
Setting Send Pan to Follow Channel Pan
Panning of the input signal can be set to follow the pan or balance
values of the Input Channel or FX Return feeding the Aux bus.
To set the Aux Send pan to follow Channel pan:
1 Go to Options > Busses.
2 On any linked bus pairs, select the Follows Channel Pan op-
tion. This setting is applied globally to the corresponding Aux
or Variable Group Send.
On-Screen Send Controls
To control Aux/Variable Groups sends on screen:
3 Select one or more Input Channels and/or FX Returns.
4 In the Aux Sends section, do the following:
• Click the
On button to turn to the send on.
• Click and drag the knob to adjust the send level. The send
level is indicated in the Aux Send display.
To control Variable Group sends on screen:
1 Select one or more Input Channels and/or FX Returns.
2 In the Bus Assign section, click the Var Groups button to en-
gage Variable Groups. Variable Group sends replace Aux
sends on-screen.
3 In the Var Groups section, do the following:
• Click the
On button to turn to the send on.
• Click and drag the knob to adjust the send level. The send
level is indicated in the Aux Send display.
Aux send level controls (left) and send pan (right)
Aux send level controls (left) and send pan (right)
Aux 1 Aux1Pan
Kick
Aux1Pan
1LR
On-screen Aux send level control knob (top) and On button (bottom)
On-screen Aux send level control knob (top) and On button (bottom)