Specifications

Chapter 10: Auxes and Variable Groups 109
Assigning Variable Group Sends to the Channel
Encoders
To assign Variable Group sends to the channel encoders:
1 Bank Input Channels and/or FX Returns to the channel strips.
2 Press the Aux Channel Encoder Assign switch. The Aux
switch flashes indicating the channel encoders are in Aux Se-
lect mode.
3 Press the Page > Channel Encoder Navigation switch to ac-
cess the Variable Group busses.
4 Press a channel encoder under the display showing the Vari-
able Group sends you want to assign to the channel encoders.
For example, to assign channel send controls for Variable
Group bus 1, press the encoder under the display showing
Grp 1.
5 Press the Page > Channel Encoder Navigation switch to ac-
cess the next set of Variable Group sends.
Adjusting Sends on the Channel Encoders
To adjust Aux/Variable Group sends from the channel encoders:
1 Press the channel encoder In switch to turn the send for that
channel on. The switch lights to indicate the send is on.
2 To adjust mono send level, do either of the following:
• Rotate the channel encoders as needed. The level indicator
in the display shows the relative send level setting for the
corresponding channel.
– or –
• Press the Flip to Faders switch, then adjust the channel
fader.
3 To toggle the Pre/Post status of a send, press the channel en-
coder
Sel switch under the display showing the send you want
to adjust. The send is pre-fader when the Sel switch is lit.
To return to the Aux Select menu:
 Press the Back/Top Channel Encoder Navigation switch.
Adjusting Sends Using Channel Control
When adjusting sends using Channel Control, adjustments made
to sends affect only the selected channel.
To control Aux or Variable Group sends in Channel Control:
1 Bank Input Channels and/or FX Returns to the channel strips.
2 Select one or more channels.
3 Make sure the main Channel Control menu is shown in the
Channel Control displays.
4 Press the Channel Control encoder under the display showing
Aux 1–8, Aux 9–16, or Var Grou. That group of sends is now
available on the Channel Control encoders
5 Press the Channel Control encoder In switch under the display
showing the send you want to turn on. The switch is lit to in-
dicate that the send is on.
6 To adjust mono send level in Channel Control, rotate the en-
coder under the display showing the send you want to adjust.
7 To toggle the Pre/Post status of a send, press the Channel Con-
trol encoder
Sel for the corresponding send.
8 Select a different channel to adjust its sends in Channel Con-
trol.
Variable Group busses in the Aux Select menu
Channel encoder Sel switch (top) and In switch (bottom)
Grp 1 Grp 2 Grp 3
Kick
Aux 1
1LR
Snare
Aux 1
2LR
Hats
Aux 1
3LR
Press the Back/Top Channel Control Navigation switch to
return to the Channel Control main menu.
Main Channel Control showing Aux and Variable Group encoders
Channel Control with Auxes 1–8 assigned to Channel Control (Aux
sends 1–3 shown)
mpLim
ExpGate
Aux 1-8
Aux 9-16 Var Grps
Aux 1
1
Kick
Aux 2 Aux 3