Specifications

S3L System Guide108
Adjusting Aux and Variable Group
Send Controls
You can adjust mono and stereo-linked Aux and Variable Group
sends using the Channel encoders, Channel Control, and
on-screen controls.
Adjusting Sends Using the Channel
Encoders
To adjust sends using the Channel encoders, you must first assign
the sends for the Aux or Variable Group bus to the Channel en-
coders using the Aux Select menu.
Assigning Aux Sends to the Channel Encoders
To assign Aux sends to the channel encoders:
1 Bank Input Channels and/or FX Returns to the channel strips.
2 Press the Aux Channel Encoder Assign switch. The Aux
switch flashes indicating the channel encoders are in Aux Se-
lect mode.
The Aux Select menu (
Aux1, Aux 2, Aux 3 and so on) appears in
the channel displays.
3 Press a channel encoder under the display showing the sends
you want to assign to the channel encoders. For example, to as-
sign channel send controls for Aux bus 1, press the encoder un-
der the display showing
Aux 1.
The sends for the selected bus are shown in the channel displays.
Send levels are adjusted using the corresponding channel encod-
ers.
4 Press the Page > Channel Encoder Navigation switch to ac-
cess the next set of Aux sends.
Aux Channel Encoder Assign switch
Aux Select menu
The number of available busses depends on the overall
Aux/Group bus configuration. See “Configuring Aux and
Group Busses” on page 88.
Group Channel
Dyn
Mix
Insert Pan
Aux Flip
Input EQ
Gain
HPF
Comp
Pan
Aux
Flip
Aux 1 Aux 2 Aux 3
Channel encoder and display in Aux Select mode
Channel encoders with Aux 1 sends assigned
The Page > Channel Navigation switch
Aux 1
Kick
Aux 1
1 LR
Snare
Aux 1
2 LR
Hats
Aux 1
3 LR
Source
Back
Page Page
Top