Specifications

Chapter 8: Outputs and Output Routing 99
Resetting Bus Assignments
You can remove input assignments from a Group on-screen.
To remove an input assignment from a bus:
1 Select the bus output channel you want to change so that its
members are displayed on-screen.
2 In the Members list, right-click the input assignment you want
to remove and choose
Unassign.
To remove all input assignments from a bus:
1 Select the bus output channel you want to change so that its
members are displayed on-screen.
2 Click the pop-up menu at the bottom of the Members list and
choose
Reset Mix.
Copying Assignments Between Busses
You can copy the current input assignments from one bus to an-
other bus of the same type. If the busses are linked, assignments
can be copied from other linked busses. This lets you quickly du-
plicate monitor mixes.
To copy input assignments between busses:
1 Target the bus that you want to be the destination of the copied
assignments by selecting its on-screen channel strip.
2 Click the Input Assign pop-up menu at the bottom of the Mem-
bers list, choose
Replace With Mix From, then choose the bus
whose assignments you want to copy to the currently selected
bus.
Copying Mains Assignments to Aux
Busses
You can copy the current Main bus assignments to Aux busses to
base monitor mixes from a main mix. Assignments to the Main
Left/ Right busses can be copied to linked Aux busses, and as-
signments to the Center/Mono bus can be copied to mono Aux
busses.
To copy bus assignments from the Mains to Auxes:
1 Target the Aux bus that you want to be the destination of the
copied assignments by selecting its on-screen channel strip.
2 Click the Input Assign pop-up menu at the bottom of the Mem-
bers list, choose
Replace With Mix From, then choose the avail-
able Main bus (
Left-Right or Mono) whose assignments you
want to copy to the currently selected bus.
The state of the Aux controls follow the state of the correspond-
ing controls on the Input Channels assigned to the Mains: Chan-
nel Mute maps to Bus Send, Channel Pan maps to Bus Pan, and
Channel Fader level maps to Bus Send level.
Removing an input assignments from a bus
Removing all input assignments from a bus
Copying Aux bus assignments overwrites all the assignments
on the destination Aux bus.
Copying input assignments between Aux busses