User guide

Chapter 4: Surface Controls 25
PAN
Press the PAN key to display the Pan knob set to configure stereo or surround panning. In normal mode, the stereo pan control is
typically displayed. In channel mode, the first page of eight pan knobs is shown.
INPUT
Press the INPUT key to display the Input knob set to configure input routing, mic gains, phantom power, and other application-spe-
cific parameters.
DYN
Press the DYN key to display the Dynamics knob set to configure compressors, limiters, expanders, and gates.
GROUP
Press the GROUP key (SHIFT+AUX/GROUP) to display the Group knob set to configure group bus routing or control group (VCA)
membership.
MIX
Press the MIX key to display the Mix knob set to configure output routing.
Dual-Function Knobs
Some knobs have two functions that are toggled by pressing the knob SEL key (such as EQ Frequency and Q). The knob name
changes in the display to show the current function. Dual-function knobs are supported in normal mode.
Knob Set Navigation
Since a knob set may have more parameters than knobs, use the two <PAG > keys to scroll among them.
<PAGE
Press the <PAGE key to scroll to the previous page. When on the first page, pressing <PAGE key does nothing. The <PAGE key
lights yellow when there is a previous page to go to.
PAGE>
Press the PAGE> key to scroll to the next page. When on the last page, pressing the PAGE> key does nothing. The PAGE> key
lights yellow when there is a next page to go to.
Configuration Pages (CFG)
Many knob sets have a configuration page to set up that knob set. The configuration page for the Inserts knob set, for example, is
used to assign plug-ins to a track. The configuration page for the Aux knob set assigns aux sends to a track. Some applications can
configure presets for plug-ins and EQs.
Knob Set navigation keys
SEL
ON
BACK
TOP
CFG
PAGE
CFG
PAGE
SOLO
ON