User guide

Artist Mix User Guide20
Fader
The fader controls the track assigned to this strip. It is motorized so it reflects changes made in the application, such as automation.
It is also touch sensitive, which some applications use for automation.
When the
Select by Touch General preference is selected, touching a fader selects that track in the application and attentions it on
that strip. This is the same as pressing the fader
SEL key. Holding down the SHIFT key and touching a fader sets it to unity gain.
Suspending Faders
You can turn the faders off so they do not move or follow existing automation. Automation continues to play back and affect vol-
ume or other parameters, the faders are merely ‘suspended’ from following automation data.
To turn faders off:
 Hold SHIFT and press SOLO on fader strip 1. Repeat to turn faders back on.
ON
The track is on (unmuted) when the strip ON switch is lit and off (muted) it is not lit.
SOLO
The SOLO switch lights red when that track is soloed.
Fader strip
SEL
ON
INSERTS
INPUT
CHAN
FLIP
EQ
DYN
AUX
GROUP
PAN
MIX
BACK
TOP
CFG
PAGE
CFG
PAGE
AU
T
O
R
E
C
N
ASS
IG
N
S
EL
Y
12
60
40
6
0
5
10
20
30
8
SOLO
ON