Specifications

Chapter 4: Configuring HD I/O in Pro Tools 21
Identify
If you have multiple audio interfaces of the same
type connected to your system, you should con-
firm the identity of each interface. This ensures
that you select the appropriate interface in the
Peripherals list when defining its inputs and
outputs, and other settings, in the Hardware
Setup dialog.
To identify audio interfaces in your system:
1 Choose Setup > Hardware.
2 From the Peripherals list, select an audio in-
terface connected to your system.
3 Select the Identify option, located in the lower
left corner of the Hardware Setup dialog. This il-
luminates all the LEDs on the front panel of the
selected audio interface.
4 Make a note of which interface in your studio
setup corresponds to the identified interface.
5 Repeat the above steps for each additional au-
dio interface in your setup.
Configuring HD I/O
To configure controls for HD I/O:
1 Choose Setup > Hardware.
2 From the Peripherals list, select the HD I/O au-
dio interface.
3 Click the Main tab and configure the options.
4 If you have at least one HD I/O AD card, click
the
Analog In tab and configure the options. If
you have two HD I/O AD cards, this tab is la-
beled
Analog In 1–8.
Use the Up and Down Arrow keys to scroll
though the Peripherals list in the Hardware
Setup dialog.
HD I/O Hardware Setup, Main page
HD I/O Hardware Setup, Analog In page