Specifications

HD I/O Guide14
Connecting HD I/O to HD Native Cards
To connect HD I/O to an HD Native card:
 Connect HD I/O Primary Port to the DigiLink Mini Port 1 on the HD Native card using the included
DigiLink Mini cable.
To connect two HD I/Os to an HD Native card:
1 Connect the Primary Port to DigiLink Mini Port 1 on the HD Native card using the included DigiLink
Mini cable.
2 Connect the additional HD I/O (or other compatible Pro Tools audio interface) by doing one of the
following:
• Connect the Primary Port of the secondary interface to the Expansion Port of the primary inter-
face with an additional DigiLink Mini (or DigiLink to DigiLink Mini adapter).
– or –
• Connect the Primary Port of the secondary interface to DigiLink Mini Port 2 on the HD Native
card.
3 Make the necessary Loop Sync connections (see “Connecting Loop Sync” on page 15).
Figure 1. HD I/O connected to the DigiLink Mini Port 1 on an HD Native card
PORT 1PORT 2