Instruction manual

SYNC HD Guide34
SYNC Peripheral Controls in Pro Tools, SYNC Setup Software
Utility, and the Front Panel
Table 5. SYNC Peripheral controls in Pro Tools, SYNC Setup software utility, and the front panel
Available from/in:
Parameters
Pro Tools Front Panel
SYNC Setup Software
Utility
Device ID (SYNC HD Only)
no yes no
Clock References
all (Session Setup) all all
Positional References
all (Session Setup) all all
Sample Rates
all all all
Pull Rates
yes (Session Setup) yes yes
Base Clock
(Word Clock Out)
no yes
(“Base Clock”)
yes
(“Word Clock Out”)
Frame Rates
all (Session Setup) all all
LTC Output level
yes (Peripherals/Sync) yes yes
LTC Ser vo gain
yes (Session Setup) yes no
Freewheel duration
yes (Session Setup) yes yes
Video Format (NTSC/PAL)
yes (Session Setup) yes yes
VITC Read Lines
yes (Peripherals/Sync) yes yes
VITC Generate Lines
yes (Peripherals/Sync) yes yes
VITC Insertion Enable
yes (Peripherals/Sync) yes yes
Pitch Memory Enable
yes (Peripherals/Sync) yes yes
Window Dub
all (Peripherals/Sync) on/off only yes, all
Bi-Phase/Tach Pulses/Frame
yes (Peripherals/Sync) yes yes
Bi-Phase/Tach Wiring
yes (Peripherals/Sync) no no
Gen/Bi-Phase Preset
yes (Session Setup) yes yes
GPI
yes no no
VSO
yes (Session Setup) no yes
Idle MTC Enable
yes (Peripherals/Sync) yes yes
USD Compatibility Mode
(SYNC I/O Only)
no yes no