User Guide

54
Install3GB updates the current configuration you are running; it does not create another
one.
After pressing any key the window closes and you will need to reboot the computer.
Restoring the Original Configuration
You can restore the system to the original configuration.
To restore the configuration:
1. Run the Install3GB.exe as described in “Using Install3GB.exe to Extend Your Usable
Address Space” on page 53.
2. Type 0 (zero) for the memory setting.
This removes the “userva” setting in the boot configuration.
3. Reboot the system.
Documentation Changes
The following change has occurred since the print documentation was completed.
Exporting to XDCAM
In the Avid editor Help, the topic: “Exporting to XDCAM,” step 8 informs you that “If your
exported sequence has more than two audio tracks, only two tracks are exported, even
though the Sony XDCAM device is capable of handling 4 to 8 tracks. If your sequence has
more than two tracks, they are mixed down during export.”
This should now read: “If you are using the Sony PDW HD1500 or the Sony PDW 1500
XDCAM devices, export of up to 8 tracks of audio is supported for the MPEG IMX and
XDCAM HD 50 Mbits formats. For other formats or devices that do not support 8 tracks, the
system mixes down to audio tracks 1 and 2 during export.”
Capturing DV 25 Media
In the “Capturing DV 25 Media” topic in the help, the following paragraph was
unintentionally omitted.
• If you are using an Avid Nitris DX or Mojo DX, or if you are not using an Avid
input/output hardware device (software-only), you use a 1394 port on your computer
(Host 1394). You specify that you are capturing via the 1394 port by selecting Host
1394 from the Video menu in the Capture tool.