Specifications

Chapter 3: Using Studio Monitor Express 13
Enabling and Configuring Talkback
To enable and use a talkback mic:
1 Connect a microphone to a mic preamp, and connect the preamp output to an input on your audio interface. Set the input gain
as appropriate.
2 In the SME Patching tab, assign the Audio Device In to the I/O channel to which you connected your mic preamp.
3 In the SME Sources tab, create and name a Source for Talkback.
4 In the Main Tab, click to enable Talkback for each section requiring talkback routing (Mon A, Mon B).
5 In the SME Main Tab, click the Talkback button to enable Talkback.
6 Press the Artist Control Talkback button in the Setup Page of the Soft Keys to engage Talkback.