Specifications
Studio Monitor Express6
To set the level for the Control Room output:
Turn the CONTROL ROOM/MONITOR knob.
To set level for Monitor A:
Hold down a Function key and then turn the CONTROL ROOM/MONITOR knob.
To set level for Monitor B:
Adjust the Monitor B slider in the SME Main tab (Monitor B can be controlled only on-screen with a mouse).
Cut
Cuts the signal completely.
Dim
Attenuates the signal to the Dim Level set in the Config tab (page 13).
Fix
Sets the signal to the Fixed Level set on the Config tab (correlates to the Dim button in Artist Control Setup > Control Room Touch-
screen).
Phase
Reverses the phase of the left channel in the Control Room outputs only. Phase is only available on-screen.
Sources
The Sources tab is where you create the sources to SME mixer inputs to make them available in the Main tab.
To create a source:
1 Select the Format (Mono, Stereo, or 5.1).
2 Select the Start Channel (the channel where you want the first, or left-most, source channel to be routed). Choices are slightly
different on Mac than on Windows as follows:
Sources tab