Install guide

Media Application Controller Multiple Workstation Install Guide Pro Tools

Pro Tools has configuration boxes for the four possible controllers. MC stan-

dalone users need to configure only one controller. System 5-MC users need to

configure one controller for each CM408T module because the MC mirrors

one CM408T and does not require an extra HUI controller.

4. For each controller you use, select HUI from the Type drop-down menu.

5. Configure each controller to have the input and output MIDI ports set for Pro-

Tools in the Euphonix Preferences Pane. Click on the Receive From and Send

To drop-down menus, hover over Predefined, then select from the Euphonix

MIDI ports.

For example, if you set ProTools to use MIDI ports 9–12, your first HUI con-

troller’s receive and transmit ports should be set to EphMIDIEP9.

Figure 4-3 Excerpt from Pro Tools MIDI menu

6. Select 8 from the Ch # drop-down menu as the number of channels for each

controller.

7. Press OK.

The MC updates the channel and track information.

NOTE: System 5-MC owners with joystick panners can set the last controller to Sur-

round Panner to use the MC's joysticks to control panning in Pro Tools. See

the Media Application Controller Operation Manual for more information.