Specifications

Chapter 3: Specifications 9
Chapter 3: Specifications
Audio Specifications
Stage Inputs
Stage Outputs
All measurements at Fs=48 kHz with 150 Ohm source impedance and 600 Ohm load impedance, unless otherwise specified.
0 dBU = 0.775Vrms.
SRI Analog Mic/Line Inputs
Parameter Specifications Limit Units Condition/ Comment
Type Balanced, XLR3-Female
Gain +10 to +60 dB 6 dB analog steps with 0.1 dB dig-
ital increments and crossfade at
analog relay switch point
Max Input Level +34 dBu Pad ON
Pad 20 dB
Input Impedance, pad OFF 10 k Ohm Balanced
Input Impedance, pad ON 4 k Ohm Balanced
Phantom Power +48 VDC 10 mA max per channel
EIN –126 max dBu Max gain, 150 ohm source,
22 Hz-20 kHz BW, unweighted
THD + N 0.003 % Minimum gain, pad OFF, –1 dBFS
output, 20 HZ – 20 kHz BW
A/D Converter Latency 0.25 ms Fs=48kHz
SRO Analog Line Outputs
Parameter Specifications Limit Units Condition/Comment
Type Balanced, XLR3-Male
Impedance 50 Ohm Each leg to ground
Maximum Output Level +24 max dBu
D/A Converter Latency 0.58 ms Fs=48kHz