Specifications

VENUE Stage Rack Guide6
Audio Connections
Analog Audio Inputs (SRI Cards)
(Balanced Female XLR Connectors)
 Connect analog mic-level or line-level input sources to any
of the input connectors on any SRI Card.
Applying Phantom Power to Stage Rack Inputs
Each SRI Card input has available standard 48V phantom
power.
To apply phantom power to a Stage Rack input source:
1 Target a channel in the ACS section of the console.
2 Press the +48V switch in the ACS Input section.
The corresponding channel’s “+48V” LED on the Stage Rack
Input Card lights to indicate phantom power is on.
Analog Audio Outputs (SRO Cards)
(Balanced Male XLR Connectors)
 Connect analog line-level output destinations (such as
power amplifiers, crossovers, or speakers) to any of the output
connectors on any SRO Card.
Digital Audio Inputs (DSI Cards)
AES3 (AES/EBU)
(Balanced, Female XLR Connectors)
• Connect digital AES sources to any of the input connectors
on any DSI card.
ADAT Optical
(TOSLink)
• Connect ADAT (optical) sources to the optical input con-
nector on any DSI card.
Figure 4. Audio connectors on Stage Rack (analog options shown)
Stage Rack Input Cards
Stage Rack Output Card
Before connecting or disconnecting a microphone on any
Stage Rack Input, make sure phantom power is turned off
for that input, and the channel is muted.
For instructions on connecting and using the DSI card, in-
cluding sample rate and clock considerations, see the
VENUE
D-Show Guide.