Specifications

DF66 Guide10
System PC Configuration
1 Open the Computer Management applet by choosing Start
> Settings > Control Panel > Administrative Tools > Computer
Management.
2 In the left pane, expand Local Users And Groups, and select
Users.
3 In a blank area of the right pane, right-click and select New
User from the popup menu.
4 Type LCCPilot in the User name field, and Euphonix in the
Password and Confirm password fields. These are case-sensi-
tive.
5 Deselect User must change password at next logon and select
Password never expires.
6 Click Create, then Close to close the dialog.
7 Close Computer Management and open Windows Explorer
(Windows key + E) or My Computer.
8 Right-click on the C:\ drive and choose Sharing and Security.
9 Click New Share.
10 Enter eMixDisk as the share name (with exact spelling and
capitalization).
11 Click the Permissions button. The Permissions for dialog
appears. Everyone should appear in the Group or user names
field. In the Permissions for Everyone field, the Allow checkbox
should be selected for Read.
12 Select the Allow checkbox for Full Control, click Apply, and
then click the Add button. The Select Users, Computers, or
Groups dialog appears.
13 Type LCCPilot, and click OK. The list of users should now
say LCCPilot (S5M\LCCPilot), or LCCPilot (S5S\LCCPilot) if
you are running two linked System 5 consoles and installing
the DF66 on the slave console.
14 Click Apply and OK to exit the Permissions dialog.
15 Click OK to exit the New Share dialog.
16 Click OK to exit the Properties dialog.
17 Restart the System PC.
Network Settings
To set the IP address manually:
1 Connect a keyboard and monitor to the DF66.
2 Power off the core and restart it.
3 After the core comes back online, go to the config web page
(http://192.168.0.200/cgi-bin/config.cgi) on the System PC.
4 Select Exit DSP App, and click Do It.
5 At the command prompt, type notepad d:\dsppilotapp.ini.
6 Enter a new IP address, save the file, and exit Notepad.
7 Restart the DF66.
This section is used to configure the DF66’s DHCP, IP Address,
Mask, and Gateway network settings. Each DF66 SuperCore
attached to the system must have a unique IP address.
The Network Settings configuration has not yet been
implemented. You can set the IP address manually by
editing the d:\dsppilotapp.ini file on the DF66.
Network Settings window
DF66 IP Address
1 (Primary) 192.168.0.200
1A (Backup) 192.168.0.201