Specifications

Chapter 3: Configuring the DF66 9
Chapter 3: Configuring the DF66
DF66 configuration settings can be changed from the System
PC with a Web browser.
To access DF66 configuration settings:
1 With the system running, choose Start > Programs >
Internet Explorer.
2 Type the address http://192.168.0.200/cgi-bin/config.cgi
and press Enter.
General Settings
Name Enter a name for the system.
ID Default value is 1.
Redundant Select this box to configure the DF66 as the
redundant DSP core.
Sync Source
1 Choose a Sync Source from the pop-up menu.
2 Click Apply. The DSP pilot application restarts, the pilot
goes offline and then returns for a re-sync.
Sample Rate
1 Choose the Sample Rate from the pop-up menu.
2 Click Apply. The DSP pilot application restarts, the pilot
goes offline and then returns for a re-sync.
192.168.0.200 is the default IP address for the DF66.
General Settings window