User`s guide

Chapter 6: DigiDrive Management for Windows NT and Windows 2000 29
7 Click OK to create the primary partition.
8 Repeat steps 1 through 4 to create up to four
primary partitions.
9 From the Partition menu, choose Commit
Changes Now. The first Confirm dialog box ap-
pears (Figure 25).
10 Click Yes. The following Disk Administrator
dialog box appears (Figure 26).
11 Click OK and follow the procedure explained
in “Creating an Emergency Repair Disk” on
page 31.
To create a primary partition for Windows 2000:
1 Launch Windows 2000 and log in to an ac-
count with administrative privileges. If you do
not have administrative privileges, see your sys-
tem administrator to get privileges.
2 Go to Start > Settings > Control Panel.
3 Double-click Administrative Tools, and then
double-click Computer Management.
4 In the console tree under Storage, click Disk
Management.
5 Beneath the disk name (located to the left of
the disk), the display will indicate whether the
disk is “basic” or “dynamic.” Pro Tools does not
support dynamic disks. If the disk is dynamic,
right-click on the drive name and select Up-
grade To Basic.
6 Right-click an unallocated region of a basic
disk, and then click Create Partition.
7 In the Create Partition wizard, click Next,
then click Primary Partition. Follow the instruc-
tions on your screen.
8 Microsoft's published limit for partition size
with FAT 32 is 4 TB. You can choose any size par-
tition up to the complete capacity of the drive.
Figure 25. Confirm
Figure 26. Disk Administrator