Car Video System User Manual

Media Station|PT Guide90
2 Do one of the following:
Select one of the displayed tape names and
click OK.
– or –
Click New to add a new tape to the list.
3 Ensure that the Device setting is set to Avid
DNA (if you are outputting through an Avid
video peripheral) or IEEE 1394 (if you are out-
putting through FireWire) by doing one of the
following:
Click the DNA/1394 button in the Time-
line.
– or –
Select Special > Device > Avid DNA or IEEE
1394.
4 Set the In and Out points in the Timeline as
desired.
5 Choose Output > Digital Cut. The Digital Cut
Tool appears.
6 In the Source Track buttons on the far left, se-
lect the top video track. Only the selected track
and the video tracks below it will be recorded.
7 Select the audio tracks you want to include.
Only the selected tracks will be included in the
recording.
8 Use the Record Track buttons on the right to
select which audio and video tracks to record on
the tape.
DNA/1394 button (showing both DNA and 1394 status)
Avid DNA and IEEE 1394 options in the Device pop-up
menu
DNA/1394 button
Digital Cut Tool
Selected Source tracks
Source
Track
buttons
Record
Track
buttons
Record
Enable
Preview