Car Video System User Manual
Media Station|PT Guide68
3 Do one of the following:
• To combine multiple video tracks into the
mixdown, select a video track, then click
the Record Track Monitor button next to
the track. Video tracks above the selected
track will not be included in the mixdown.
– or –
• To select only one video track for mix-
down, Control-click (Windows) or Com-
mand-click (Macintosh) the Record Track
Monitor button. The button will turn
green.
4 On the Timeline or in the Record Monitor,
drag the cursor to the position in the sequence
at which you wish the mixdown to start. (Press
the Home key to move the cursor to the begin-
ning of the Timeline.)
5 Under the Record Monitor, click the Mark In
button to mark the In point at the beginning of
the sequence.
6 Drag the cursor to the position at which you
want the sequence to end. (Press the End key to
move the cursor to the end of the sequence.)
7 Click Mark Out button to set the Out point.
The portion of the sequence you have selected
will be mixed down.
8 Choose Special > Video Mixdown.
9 From the Target bin pop-up menu, choose the
bin where you wish to store the master clip of
the video mixdown.
10 From the Target Drive pop-up menu, choose
the volume where you wish to save the video
mixdown. On the volume you select, MXF me-
dia are stored in the Avid MediaFiles folder, and
OMF media are stored in the OMFI MediaFiles
folder.
Record Track monitor
Record Track monitor
Record Track
Monitor
Record Track
Monitor (solo)
Record Monitor controls
Video Mixdown dialog
Mark
Out
Mark
In