Car Video System User Manual

Media Station|PT Guide64
The following settings may also appear under
the Audio Details tab, depending on the selected
export method:
Render All Audio Effects Select the Render All
Audio Effects option so that all audio effects are
rendered before export. If you already manually
rendered effects, selecting this option will not
create new files. It is highly recommended that
all effects be rendered before exporting the se-
quence. (See “Rendering All Effects” on
page 60.)
Include Rendered Audio Effects Select the In-
clude Rendered Audio Effects option. Otherwise,
the exported sequence will include the original
audio files without any AudioSuite effects from
the original sequence—even if those effects were
previously rendered.
Convert Audio Sample Rate/Bit Depth/File For-
mat Select Project for any of these, and the cur-
rent Audio Project Setting will be used. (See
“Configuring Audio Settings” on page 41.)
While new audio files are typically stored in the
OMFI MediaFiles folder (for OMF audio) or the
Avid MediaFiles folder (for MXF audio), some
workflows let you choose a different target des-
tination for audio in the Media Destination sec-
tion of the Audio Details tab, as follows:
Media Drive This option exports audio media to
the OMFI or Avid MediaFiles folder on con-
nected storage. Select the Use Media Creation
Settings option to use the default settings, or de-
select that option to choose a media drive from
the pop-up menu.
Folder This option exports audio media to a spe-
cific folder. Select the Use Same Folder as AAF
File option to export the media into the same
folder you designated for exporting the AAF se-
quence, or deselect this option to select a spe-
cific folder location for the media.
Embedded in AAF This option embeds the audio
media in the AAF sequence that is exported from
Media Station|PT. Unlike embedded video,
Pro Tools can import and play audio which is
embedded in an AAF sequence. Embedding au-
dio within the AAF sequence makes file manage-
ment much simpler because there is only one
file to move—the sequence. There is a limit of
2 GB for embedded AAF.
8 Click Save or Save As in the Export Settings di-
alog:
• Click Save to use the specified settings
whenever Export to Pro Tools is selected
from the Export Settings menu. These set-
tings will also be used when choosing any
of the options located at File > Send To >
Media StationPT to Pro Tools.
• Click Save As to save these settings as a pre-
set with a different name. These settings
can then be recalled in the Export dialog. If
you click Save As instead of Save, the Ex-
port to Pro Tools settings will not be
changed.
9 Click Save in the Export As dialog. (The Export
Settings cannot be saved until you have selected
a target drive for both audio and video.)
Pro Tools cannot play video that is embed-
ded in an AAF sequence, but it can read the
video editing metadata when imported into
a satellite track. Do not use this option if
you want to import the video itself into
Pro Tools. (See “Opening an AAF Sequence
for Playback on a Video Satellite System”
on page 110.)