Car Video System User Manual

Chapter 3: Basic Media Station|PT Workflows 61
8 Choose Clip > Render In/Out (if the command
appears grayed out, click in the Timeline again).
9 In the Render Effects dialog, choose Effect
Source Drive from the Drive pop-up menu. This
will write the rendered effect to the same vol-
ume as the original files.
10 Click OK.
11 To play the sequence with the rendered ef-
fects, press the Home key to move the cursor to
the beginning of the sequence, then click the
Play button (or press the Spacebar) to play.
Removing Third-Party Effects from a
Sequence
If you open a sequence that has a third-party
video or audio effect that you cannot render,
you can remove the effect.
To remove an effect from a sequence:
1 Click the effect in the Timeline so that the cur-
sor is placed over the small effect box.
2 Click the Track Enable button to select the
track that holds the effect.
3 Click the Remove Effect button.
Exporting a Sequence
Once all effects have been rendered, export the
sequence as an AAF sequence.
To manually export an AAF sequence:
1 Select the sequence in the bin.
2 Select File > Export.
Render Effects dialog
This selection keeps audio files on audio stor-
age and video files on video storage. If you se-
lect only one volume, both the rendered audio
and video files will be stored on the selected
volume, which could cause playback errors
with Pro Tools.
Remove Effect button
Export As dialog
Track
Enable
button
Remove
Effect