Car Video System User Manual

Chapter 3: Basic Media Station|PT Workflows 41
Media Creation settings are saved with the
project. You will need to configure the Video
Project Settings for each new project.
Configuring Audio Settings
To configure the audio settings for a project:
1 Click the Settings tab in the Project window.
2 Double-click Audio Project in the Settings list.
3 Click the Main tab in the Audio Project Set-
tings window.
4 Set the Sample Rate, Audio File Format, and
Sample Bit Depth. MXF and OMF WAVE (BWF)
are the recommended audio file formats because
they are widely supported and maintain the
most metadata.
5 Verify other settings as required. For most
projects, the default settings are recommended.
6 After configuring the Audio Project Settings,
close the window.
Audio Project Settings are saved with the
project. You will need to configure the Audio
Project Settings for each new project.
D-Control and D-Command
Configuration Requirements
When monitoring the audio from
Media Station|PT via a Digidesign audio periph-
eral and a D-Control or D-Command system, it
is necessary to modify the Audio Project Settings
in order to properly output audio.
To change Media Station|PT Audio Project
Settings for D-Control or D-Command:
1 Start Media Station|PT and open a new project
as described in “Starting a New Project with
Media Station|PT” on page 38.
2 In the Project window, click the Settings tab
and double-click Audio Settings.
3 In the Audio Project Settings dialog, click the
Output tab.
To save time, you can re-use the same
project for all of your audio and video cap-
turing, and simply create new bins and se-
quences as needed.
Audio Project Settings dialog, Main tab
Media Station|PT Audio Project Settings dialog