Car Video System User Manual

Media Station|PT Guide30
4 Set the resolution on both monitors to the
same resolution (1280x1024 is recommended).
5 Click the Advanced button.
6 Click the specific nVidia tab.
7 Select nView Display Settings and choose Du-
alview under nView Display Mode.
8 Click Apply.
9 Click Performance & Quality Settings.
10 From the View pop-up menu, ensure that the
Advanced Settings option is selected.
11 Ensure that the Hardware Acceleration op-
tion is set to Multi-Display Performance mode.
12 Confirm that Vertical Sync is set to Applica-
tion-Controlled.
13 Click OK.
Supported Video Cards
See www.digidesign.com for detailed informa-
tion on video cards that support full-screen
playback.
DVI Signal Distance Limitations
Due to limitations with DVI signals, the signal
may degrade if the monitor is more than a few
meters away from the computer.
If you experience signal degradation, you may
need to use a DVI extension booster or a DVI to
HDMI converter.
Installing Media Station|PT
Software on Mac OS X
To install Media Station|PT software on
Mac OS X:
1 Make sure you are logged in as an Administra-
tor for the account where you want to install
Media Station|PT. For details on Administrator
privileges in Mac OS X, refer to your Apple OS X
documentation.
2 Insert the Media Station|PT Installer DVD into
your DVD drive.
3 On the Media Station|PT Installer DVD, locate
and launch Media StationPT.mpkg.
4 Click Continue.
5 In the Installer window, click Continue.
6 If you agree with the license agreement, click
Continue.
7 In the Select Destination page of the Installer
window, make sure the destination volume is on
your system drive.
8 Click Continue.
9 Click Install.
10 If you are prompted to authenticate the in-
stallation, type your password and click OK.
11 Click Continue Installation.
12 When installation is complete, click Restart.
If you are installing Media Station|PT on
the same computer as Pro Tools, install
Media Station|PT before installing
Pro Tools.