Car Video System User Manual

Media Station|PT Guide130
2 Insert a video tape into your VTR.
3 To ensure that the tape deck is properly con-
figured, refer to the following topic in
Media Station|PT Help (Help > Avid
Media Station|PT Help): Configuring a Deck or
Multiple Decks.
4 Do one of the following:
• Select one of the displayed tape names and
click OK.
– or –
• Click New to add a new tape to the list.
5 Ensure that the Device setting is set to Avid
DNA (if you are outputting through an Avid
video peripheral) or IEEE 1394 (if you are out-
putting through FireWire) by doing one of the
following:
• Click the DNA/1394 button in the Time-
line.
– or –
• Select Special > Device > Avid DNA or IEEE
1394.
6 Drag the sequence you want to record to tape
from the bin to the Record Monitor.
7 Drag the sequence from the bin to the Record
Monitor.
8 Select Output > Digital Cut. The Digital Cut
Tool appears.
9 If you want to set In and Out points for a dig-
ital cut.
When using Media Station|PT in Satellite
mode for 24p and 23.976 projects, only the
24 and 23.976 Output Formats are sup-
ported. The 29.97 Output Format (+25%
playback speed with no pulldown) is not
supported in Satellite mode for 24p and
23.976p projects.
DNA/1394 button (showing both DNA and 1394 status)
DNA/1394 button
Avid DNA and IEEE 1394 options in the Device pop-up
menu
Digital Cut Tool