Car Video System User Manual

Media Station|PT Guide128
To select a portion of video to capture:
1 In the Capture Tool, use one of the following
methods to mark the position where you want
the capture to begin:
• Press the Spacebar (or click Play) to start
playback on the VTR, and click Mark In at
the desired position.
• Use the Transport controls to queue the
tape to the position at which you wish to
start capturing, and click Mark In.
• Type a time code value in the Mark In field.
2 Use one of the following methods to mark the
position where you want the capture to end:
• If the VTR is playing back, click Mark Out
at the desired position.
• Use the Transport controls to queue the
tape to the position at which you wish to
end capturing, and click Mark Out.
• Type a time code value in the Mark Out
field.
The exact length of the clip to be captured ap-
pears in the Duration display.
3 You can also do the following:
• To automatically queue the tape to the
Mark In point, click Go to In.
• To automatically queue the tape to the
Mark Out point, click Go to Out.
• To automatically mark a specific frame (not
to be reflected in the capture), click Mark
Memory.
• To clear any of the Mark In, Mark Out, or
Mark Memory points, click Clear Display
next to the appropriate button.
• To begin capturing at a specific point for a
specific duration, type time code values in
the Mark In and Duration fields.
• To end capturing at a specific point for a
specific duration, type time code values in
the Mark Out and Duration fields.
• To begin an open-ended capture with no
definitive stopping point, type a time code
value in the Mark In field.
4 You are now ready to begin capturing, as de-
scribed in “Capturing Audio and Video with a
Video Satellite System” on page 126. When you
begin capturing, the VTR queues to the In point
and begins capturing video, then stops automat-
ically when it reaches the Out point.
You can capture without first entering an In
point, but this is not advised because of un-
predictable delays between clicking the
Record button and actually capturing video.
Mark In and Mark Out controls
Mark Out
Duration
Mark Memory Go To Memory
Go to In
Go to Out
Mark In
Clear
Display