Car Video System User Manual

Media Station|PT Guide126
10 From the Res pop-up menu, choose the reso-
lution of video you wish to capture.
11 Click the Toggle Storage button so that one
volume is showing, and select the volume where
the video media will be stored. The available re-
cording time for each volume displays next to it.
12 If the VTR is not correctly identified in the
Source pop-up menu, choose Auto-Configure
from the source pop-up menu, then click Yes to
auto-configure the VTR with the Capture Tool
and display the name of the VTR.
13 Ensure that Delay Audio is set to 0 Frames.
14 Insert the tape into the VTR.
Media Station|PT will present a list of tapes al-
ready associated with this project and ask you
which tape you have inserted.
15 Do one of the following:
• Select one of the displayed tape names and
click OK.
– or –
• Click New to add a new tape to the list.
16 To check your inputs and levels, do the fol-
lowing:
• Click Play on the transport controls. Video
should appear in the Record Monitor and
your client monitor.
• Check audio input levels in Pro Tools.
You are now ready to capture.
Capturing Audio and Video with a
Video Satellite System
To capture audio and video:
1 Ensure the Capture Tool has been configured
for capturing. (See “Configuring the Capture
Tool” on page 124.)
2 Ensure that Pro Tools has been properly con-
nected to the video satellite. (See “Connecting
Pro Tools and a Video Satellite” on page 113.)
Capture Tool (Transport controls)
Select Tape dialog
Source
pop-up
menu
Tape
Name pop-
up menu
Delay Audio
This will be helpful if you ever need to re-
capture the same video.
When digitizing DV25 video via the
DV port, nothing will appear in the client
monitor. However, the digitized clip will be
captured correctly.