Car Video System User Manual

Media Station|PT Guide118
To change audio pull up/down settings in
Pro Tools:
1 In Pro Tools, choose Setup > Session.
2 From the Time Code Settings section of the
Session Setup window, select a rate from the Au-
dio Rate Pull Up/Down pop-up menu.
3 Click OK to apply the new pull up/down rate
to the session.
Matching Time Code Format (Drop
Frame or Non-Drop Frame)
Pro Tools and Media Station|PT must be set to
the same time code format (either Drop Frame
or Non-Drop Frame).
To ensure time code format settings are
compatible:
1 In Pro Tools, choose Setup > Session. If the
Tim e Code rate pop-up me nu displays “DF” after
the frame rate, Pro Tools is set to Drop Frame.
2 In Media Station|PT, right-click the Record
monitor, and choose Get Clip Info.
If the numbers in the TC fields are separated by
semi-colons instead of colons, the project is set
to Drop Frame.
3 If both time code formats do not match, do
one of the following:
• To force Pro Tools to match the time code
format of Media Station, select the compat-
ible time code format from the Time Code
Rate pop-up menu.
• To force Media Station|PT to match the
time code rate of Pro Tools, type semi-co-
lons (Drop Frame) or colons (Non-Drop
Frame) between the numbers in the Start-
ing TC field, and press Enter.
Pull Up/Down section of the Session Setup window
Right-clicking the Record monitor
In some project formats, Media Station|PT
can be configured for Drop Frame or Non-
Drop Frame, while the corresponding
Pro Tools time code rate can only be set to
Non-Drop Frame. In such cases,
Media Station|PT sends Non-Drop time
code information to Pro Tools, even if it is
set to Drop Frame. The following project for-
mats in Media Station|PT exhibit this be-
havior: 23.976p NTSC, 24p NTSC, and
720p/23.976.
Clip Info dialog (Media Station|PT, top) and a portion of
the Session Setup window (Pro Tools, bottom)
Starting
TC field
Session
Start field
Time
Code Rate